Stud Finder Wall Scanner 5in1 Upgraded Electronic Wall Scanner with Battery,

Description

This latest stud finder features 5 Modes-- 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep; 1 inch scan mode locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inch deep.
Upgraded Smart Sensor: The stud finder adopts intelligent micro-sensor chip with highest sensitivity, which can detect accurately and quickly
Digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly.
Easy Calibrate: :Press the Scan button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed. Keep tool flat against the wall and do not rock, tilt, or press hard when slowly sliding across the surface being the edge of the stud is picked up, the stud finder will beep. The multi-function stud finder uses state-of-the-art sensor technology to accurately and quickly position rivet wood metal AC wires!
This stud Indicates the live AC wire in all modes to avoid potentially serious mishaps, let the drill no longer be dangerous. detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.
Product Description
An accurate stud finder has great help on DIY home Project, No matter whether you’re hanging a picture, mounting a TV or renovating part of your home.
upgraded 5 in 1 stud finder
This stud finder features 5 stud modes to meet your multi detection needs. it is perfect for normal scanning of drywalls and finding joists, beams, and studs in almost all types of stud walls, for example, finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.
This 5 in 1 stud finder with new design adopts intelligent micro-sensor chip with highest sensitivity,which is the best choice for locating the studs/metal/AC ver, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Stud Scan
This Stud finder has 3 modes to detect wood and metal up to 1.5inch(38 mm), please detect in Stud Mode first to minimize false positives or find other objects further behind the wall that may not a stud
Metal Stud
The metal Stud can be detected in stud scan and deep stud Scan, you need use mental scan to confirm before reading in Stud Scan or Deep Stud Scan was a wood Stud or Mental Stud
AC Wire Scan
In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.
For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
Important notice:calibrate it before every scan
Please insert a 9V Battery( not included in package), press Power Button to turn on the tool. put it on the wall where you want to detect, and choose the Scan Mode, then press the Scan Button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed. Note: It is important to wait for calibration to complete(2-3 seconds)
Step 2: Scan the wall
then move the stud finder along the wall slowly, if shake or lift the stud finder accidently, the device needs to re-calibrate.
The narrow on the screen together with the beep signal alter, it means you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud